Søk
Produkter
    Menu Close

    High Prec. Incremental D. Sensor

    Varenr: 8738-DG25BP
    i h
    • Measuring ranges between 0 ... 2 mm and 0 ... 100 mm
    • Accuracy up to ± 0.5 μm
    • Diameter up to 8 mm
    • Vibration resistant and dust proof
    • High protection class up to IP64

    Application

    Incremental magnetic measuring heads offer maximum precision over the full range of measurements. As a result of the magnetic operating principle and the robust mechanical construction, they are insensitive to soiling and are therefore ideally suited to use in production facilities. Thanks to the high quality of their measurements, their high protection and long service life, these sensors are used in many technologies (industry, research, development etc.).

    Typical applications include:

    1. Monitoring both slow and fast movements between machine parts
    2. Measurements of position and positional changes in components and structural foundations, of servo regulators, valve and robot controllers
    3. Measurement of growth, and so on

    Description

    The incremental displacement sensors are based on a magnetic principle: consisting of a magnetic scale and a multi-slot reading head that responds to changes in magnetic flux, they detect linear movements with high precision and resolution.

    The scale of ferromagnetic alloy – or magnetic tape – is magnetized by an alternating magnetic field with a pole spacing of 0.2 mm. A special recording head and a laser measurement system guarantee that the graduations are very precise. From the magnetic pattern on the scale, the multi-slot reading head generates a signal proportional to the movement.

    The analog signal generated by the reading head is electronically divided and digitized. Changes in length can be measured with a resolution of from 1 μm down to 0.1 μm.

    Thanks to its slim shape with a diameter of 8 mm and its high accuracy over the full range of measurements, model 8738 DK is particularly suitable for use in multi-point measuring equipment. The spindle and spindle guide are protected from dust by a bellow.
    *
    *
    *